
BRIEF INTRODUCTION D_OR 1112(J0010)
Ethylene propylene monomer is polymerized by ethylene and propylene. It is primarily used in blending high grade internal combustion engine oils. The product is white transparent colloid. It is solid in normal temperature.
CHARACTERISTICS
* Excellent thickening capacity
* Excellent shear stability and thermal oxidation stability
* Good compatibility with all functional additivies and pour point depressants
* Improve the low temperature property of oil
* Good oil soluble
Item | Indice | Test Methods |
---|---|---|
Mooney Viscosity ML(1+4) 100 C | 8-13 | GB/T 1232.1-2000 |
Ethylene Content, % | 48.1-53.1 | Q/SY JH F 104001-2002 |
Molecular Weight Distribution | Narrow | ———- |
Volatility, % | <1.20 | GB/T6737 |
Vanadium Content, ppm | <10 | Q/SY JH F 104001-2002 |
Ash Content, % | <0.10 | GB/T4498 |
Shearing Stability index(SSI) | <20-25 | ———- |
Packing and Storage Packing
The product is packed in polypropylene plastic bags. Each bag weights 25 kg. Every 42 bags are packed in a wooden box. The net weight of each wooden box is 1.05 ton.
Storage: This product is non-flammable and non-explosive. It is table under normal temperature. In transportation and storage , keep the temperature not higher than 60 С. For long-team storage the suggested temperature is lower than 50 C. The dry. clean and ventilating warehouse is recommended.

PRODUCT INTRODUCTION
Ethylene Propylene rubber is polymerized by ethylene. it is primaily used in blending medium-grade international combustion engine oils. The product is white transparent colloid. It is solid at normal temperature.
Features
* Excellent thick ening capacity
* Excellent shear stability and thermal oxidation stability
* Good compatibility with all functional additives and pour point depressants
* Improve the low temperature property of oil
* Good oil solubility
Item | Typical Value | Test Methods |
---|---|---|
Appearance | White bulk | Visual |
Volatility, % | <=0.75 | GB/T 6373 (Oven Method) |
Ash Content, % | <=0.10 | GB/T 4498 (Method A) |
Ethylene Content, % | 51.8 | Q/SY JH C 104001 |
Vanadium Content, ppm | <=10 | Q/SY JH C 104004 |
Mooney Viscosity ML (1+4) 100 C | Report | GB/T 1232.1 |
Shearing Stability Index(SSI) | <=45 | ———- |

PRODUCT INTRODUCTION
D-or 1333(PPD) is the copolymer of fumarate and vinyl acetate , which has good low-temperature flow ability and excellent effect in dropping condensate. It can effective inhabit wax component in lubricant to form network structure at low-temperature, therefore, it can effective drop pour point of lubricant.
Usage
D-or 1333 can be used on cycloparaffin oil , especially on cycloparaffin base oil with low compensation point and small viscosity.
The recommended dosage : 0.1-1%
Items | Indices for SDT806A | Test Methods |
---|---|---|
Appearance | Light yellow viscos liquid | Visual inspection |
Flash point (open cup), C | 135 | GB/T 3536 |
Viscosity (100 C), mm2/s | Report | GB/T 265 |
Machinery impurities, m% | 0.08 | GB/T 511 |
Moisture Content, V% | Trace | GB/T 260 |
Packing
The product is packed in 200 liter drum ( net weight: 170 kg/drum ).
Storage
Please refer to SH/T0164, for transportation, storage and oil blending keep the temperature not higher than 60 °C. For long-term storage the suggested temperature is lower than 50 °C. The dry, clean and ventilating warehouse is recommended.

PRODUCT INTRODUCTION
With long-chain alkyl benzene sulfonic as a main raw material, super overbased synthetic calcium sulfonate is prepared by neutralization and super high alkalization reaction. The product has excellent alkaline staorage property, good oil solubility and strong acid neutralization capability, and it can immediatly neutralize organic acid in oil: meanwhile it also has excellent high-temperature detergency and thermal stability.it is a preferred additive for perparing over-based marine cylinder oil.
Product Quality Characteristics Qualiry
Characteristics and Test Methods of Product
Item | Typical value | Test Methods |
---|---|---|
Appearance | Red brown viscos liquid | Visual inspection |
Flash point (open cup), C | >180 | GB/T 3536, ASTM D 92 |
Kinematic Viscosity (100 C),ae mm2/s | <130 | GB/T 265, ASTM D 445 |
Density(20 C), kg/m3 | 1150-1250 | GB/T 2540, ASTM D 4052 |
Total base number, mg KOH/g | >410 | SH/T 0251, ASTM D 2896 |
Ca content, % (m/m) | >14 | ASTM D-4951 |
S content, % (m/m) | >1.2 | ASTM D-4951 |
Water content, % (m/m) | >0.2 | GB/T 260, ASTM D-95 |
machinery impurities, % | >0.06 | GB/T 511, Din 51592 |
Package, Storage and Shipment
- The product is packed with iron barrels, IBC, suitable for all means of transport.
- For short-term stronge and transportation, the temperature of the product shall not surpass 75c for long-team strong it shall not surpass 45c. The product is offered with a quarantee period of two years.
- This product is non-flammable, non-explosive, and non-corrosive, thus need special protection. In case of accidental contact with skin, wash it off thoroughly with water and detergents.

PRODUCT INTRODUCTION
D_or 3612(ZDPP)IS Zinc Dioctyl Primary Alkyl Dithiophosphate. This product features excellent oxidation resistance, corrosion resistance, and anti-wear and extreme pressure properties, particularly high thermal stability and favorable oil solubility, additive compatibility and resistance to emulsification. It can be compounded with detergents and dispersants to be applied in high-grade diesel engine oils or compounded with other additives to apply in anti-wear hydraulic oils. The percentage in usage is 0.5% – 3.0% when adding this product into oils.
Technical Specifications
D_or 3612 Product quality indicators and test methods
Item |
|
Test Methods | ||||
---|---|---|---|---|---|---|
Appearance | Light yellow to amber Transparent Liquid | Visual test | ||||
Color number, #, no more than |
|
GB/T 6540 or ASTM D-1500 | ||||
Density (20 C) kg/m3 | 1060 – 1150 | GB/T 2540 or ASTM D-4052 | ||||
Kinematic viscosity (100 C) mm2/s | Report | GB/T 265 or ASTM D-445 | ||||
Flash point (open), C, No less than | 180 | GB/T 3536 or ASTM D-92 | ||||
Sulphur Content, %(m/m) |
|
ASTM D-4951 | ||||
Phosphorus Content, %(m/m) |
|
|||||
Zinc Content, %(m/m) |
|
|||||
PH value, no less than |
|
SH/T 0394-1996, annex A | ||||
Moisture, %(m/m) no more than |
|
GB/T 260 , ASTM D-95 | ||||
Mechanical admixture, %(m/m), no more than | 0.07 | GB/T 511 or AM-S 90-009 |
Package, Storage
- The product is packed with iron barrels, with a net weight of 200 kg/barrel, suitable for all means of transport.
- For short-term storage and transportation, the temperature of the product shall not surpass 75 °C and for long-term storage it shall not surpass 45 °C. The product is offered with a guarantee period of two years.
- This product is non-flammable , non-explosive, non-corrosive , thus needs no special protection .

PRODUCT INTRODUCTION
D_or9195 Antioxidant is a kind of multipurpose ash-free additive. It not only boasts outstanding anti-oxidation performance, but has greatabrasion resistance and extreme pressure properties. Meanwhile, it has excellent compatibility with other additives, can be used for steam turbine oil, hydraulic oil, gear oil, internal combustion engine oil and other kinds of oil for the improvement of their anti-oxidation and abrasion resistance. It’s also an effective extreme-pressure additive for lubricating grease.
Product Quality Characteristics
Table1
Quality Characteristics and Test Method of Product
Item | Typical value | Test Methods |
---|---|---|
Appearance | Light brown transparent liqiud | Visually |
Flash point (open), C | 200 | GB/T 3536, ASTM D 92 |
Kinematic Viscosity (100 C), mm2/s | 15.80 | GB/T 265, ASTM D 445 |
Density(20 C), kg/m3 | 1058 | GB/T 2540, ASTM D 4052 |
N Content, % (m/m) | 6.50 | ASTM D-4951 |
S content, % (m/m) | 29.60 | ASTM D-4951 |
Decomposition Temperature, C | 240 min | DTA |
Package, Storage and Shipement
- Packed in barrels, 180kg/barrel or other packing method confirming to user requirements;
- Can be transported by truck, railway or ocean shipping;
- Storage and transport temperature shall not exceed 45%, has storage life of 3 years;
- Is non-toxic and non-corrosive, can be thoroughly washed out with detergent in case of skin contact.

Boronized High Molecular Weight Polyisobutylene Succinimide Description
ASHLESS BORONIZED DISPERSANT D-or 6820 is a boronized high molecular weight ash less dispersant prepared from high reactive isobutylene. It doesn’t contain chlorine.
Special features
* Excellent dispersion of oil a sludge at low temperature
* Excellent soot dispersibility
* Good detergency at high temperature
* Ant oxidation property and abrasion resistance
Application
* Used for blending API SG and higher grade gasoline engine oils
* Used for blending API CF-4 and higher grade diesel engine oils
* Particularly suitable for blending environment-friendly engine oils
* The dosage : 1.0-4.0, mass%
PEODUCT FEATURES AND TEST METHODS
* ITEM INDICE TEST METHOD
* Appearance Clear viscous
* Liquid Visual
* Density (20°C), kg/m3 890-930 GB/T1884
* Kinematic Viscosity (100°C), mm2/s 300-400 GB/T265
* Flash Point (open cup), °C 2180 GB/T267
* TBN, mg KOH/g 15 GB/T7304
* Nitrogen, m%, 21.0 SH/T0224
* Boron, mass% 0.3-0.5 SH/T0227
Quality Characteristics and Test Method of Product
Typical chemical and physical properties Appearance | Clear, slightly viscous, yellow to reddish-brown liquid |
---|---|
Viscosity @ 40 C | 280 cst |
Flash point (PM) | 185 C(365 F) |
Density @ 20 C | 0.97 g/cm3 (ASTM D1298) |
Solubility
|
|
Ash | Ash less |
Nitrogen Content | 4.5% |
PACKING AND STORAGE
Packing:The product is packed in 200 liter metal drum (net weight: 180 kg/drum).
Storage:Keep the temperature not higher than 60°C.For long-term storage the suggested temperature is lower than 50°C. T

PRODUCT INTRODUCTION
It is one of the series of lubricant additives developed by us through technical cooperation with ” Sinopec Research Institute Of Petroleum Processing”. It’s mainly made from long-chain alkyl benzene sulfonate by means of neutralization and high-base reaction. As a major metal detergent, this product boasts excellent acid neutralization capacity, good anti-rust property and high-temperature detergency, is widely used for different ICE oils.
Product Quality Characteristics
Table1
Quality Characteristics and Test Method of Product
Item | Typical value | Test Methods |
---|---|---|
Flash point (open cup), C | 180 | GB/T 3536, ASTM D 92 |
Kinematic Viscosity (100 C), mm/s | 148 | GB/T 265, ASTM D 445 |
Density(20 C), kg/m | 1113 | GB/T 2540, ASTM D 4052 |
Total Base Number, mgKOH/g | 403.5 | SH/T 0251, ASTM D2896 |
Mg Content, % (m/m) | 9.0 | ASTM D-4951 |
Water Content, %(m/m) | 0.07 | GB/T 260, ASTM D-95 |
Machinery Impurities, % | 0.07 | GB/T 511, Din 51592 |
Package, Storage and Shipement
- The product is packed with iron barrels, with a net weight of 200 kg/barrel, suitable for all means of transport.
- For short-term storage and transportation, the temperature of the product shall not surpass 75 , for long-term storage it shall not surpass 45. The product is offered with a guarantee period of two years.
- This product is non-flammable, non-explosive and non-corrosive, thus needs No special protection. In case of accidental contact with skin, wash it off Thoroughly with water and detergents.

PRODUCT INTRODUCTION
This product is primarily used for blending diesel oil or cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. It is red or brown liquid . The recommended dosage in oil is 2.0 – 2.0% .
CHARACTERISTICS
Excellent low-temperature dispersion performance high-temperature Stability free of chlorine, conforming to environmental requirements provide the lubricant with good detergency of sludge and ash effectively inhibit the generation of coke preserve alkalinity well.
PRODUCT FEATURES AND TEST METHODS
Item | Indice | Test Methods |
---|---|---|
Density (20 C), kg/m | 900 | GB/T 1884 |
Flash point (open cup), C | >175 | GB/T 267 |
Kinematics viscosity, (100 C) mm/s | 170 | GB/T 265 |
Chroma(diluted) | <6.0 | GB/T 6540 |
TBN, mg KOH/g | 20 | SH/T 0251 |
Nitrogen, m% | 1.2 | SH/T 0224 |
Water, m% | <0.09 | GB/T 260 |
Imputities, m% | <0.07 | GB/T 511 |
Package, Storage and Shipement
Packing:The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
Storage:Please refer to SH/T0164, for transportation, storage and oil blending
Keep the temperature not higher than 60 °C. For long-term storage the suggested temperature is lower than 50 °C . For dry, clean and ventilating warehouse is recommended .

Description
D_or 3618 is an oil-soluble, liquid and N-containing organic Molybdenum lubricant additive. This product is manufactured though up-to-date chemical processing. It can be engineered into lubricant oils and greases to significantly enhance their anti-wear and friction reducing performance. Additionally it shows good high temperature anti-oxidation property and low treatment level of this product into lubricant can bring them exceptional performance and high fuel economy.
peroperties typical
Items | Typical Value |
---|---|
Chemical component | N-containing organic Molybdenum |
Appearance | Breen liquid |
Density (15.6 C) g/cm3 | 1.01 |
Viscosity (100 C) mm2/s | 7.7 |
Flash Point (open cup), C | 187 |
Mo% | 6.3 |
P% | 2.1 |
S% | 8.5 |
N% | 0.62 |
Compatibility | Well compatible with mineral and synthetic oils and insoluble in water |
Recommened treatment Level
Engine oils and industrial oils | 0.1 – 0.7 % |
Lubricating greases | 1 – 3 % |
Packing: 200KG/DRUM
Like common chemicals, special safety measures are not required
Storage and transport conditions: 200KG/DRUM
Reference to SH 0164

PRODUCT Descriprion
Polyisobutylene additive is used as a viscosity-increasing polymer with excellent shear and chemical stability, as well as suitable antioxidant properties for the production of high quality gear oils and industrial oils. This polymer is widely used in lubricants, adhesives, rubber and cable insulation. It is a clear liquid that leaves no residue due to evaporation at high temperatures or thermal decomposition.
Specification
Typical Inspection | Specification | Test Methods |
---|---|---|
Kinematic Viscosity @ 100°C, cSt | 4200 +350 | ASTM D445 |
Color | 70 +20 | ASTM D1209 |
Density @ 15°C | 0.910 – 0.930 | ASTM D 1298 |
Flash point (PMC), °C | 190 Min. | ASTM D93A |
Molecular Weight, g/mol | 2400 +100 | CCALI-ST01CG/062 |
Water content, ppm weight | 50 | ASTM D6304 |
Acid Number, mg KOH/g | 0.02 Max. | ASTM D974 |
Packing
PB 2400 is packed in metal drums. Store in a dry, clean and well ventilated storage area.